The Antec Constellation C8 Curve Dual Chamber Case features a wide single curved tempered glass panel and walnut wood accents for a stunning full-view design. This case comes with extensive cooling options with radiator support of up to 360mm (top, side and bottom) and 120mm (rear), can simultaneously support up to 10x 120mm fans (top, side, bottom and rear), tool-free design, supports graphics cards up to 440mm in length and E-ATX (280mm), ATX, m-ATX and ITX motherboards.
Features
C8 Curve Wood
Constellation Series
Full-View PC Case
Super Wide Angle Single Curved Glass with Exotic Wood
C8 Curve Wood employs single piece of curved tempered glass panel which provides an uninterrupted panoramic view. Right side of front is made of wood (walnut) that could be seamlessly integrated into your interior design style.
Support Back-Connect Motherboards
Plug in cables from behind to give front a cleaner look and a smoother airflow channel.
Airflow
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.
Three-Way Fan Bracket
Bottom Fan Configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
Airflow
Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
- Airflow Partition - Block hot air from entering the PSU/Drive chamber.
Extremely Cool
Best Cooling Design
Support 3 x 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
Cavernous Space for Extreme Liquid Cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
Cooling Compatibility
Best Cooling Design
- Up to 10 fans simultaneously.
- Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear
Dustproof Design
Air Intake and Dust Filter
A. TOP | Full mesh panel
B. RIGHT SIDE | Full mesh panel
C. Bottom | Full-sized pull-out dust filter
Impressive Structure
0.8mm + 1.0mm Thick Steel & Tool-Free Design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.
Built for Builders
Graphics Cards Installation
- Provides ample width to perfectly support wider RTX40 series GPU.
- Supports vertical GPU riser brackets after removal.
- Features 8 reusable PCIe slot covers.
- Vertical Graphics Card Installation.
- 8 x Fully Open PCle Slots.
Powerful Compatibility
Power Supply Installation
- Stylish PSU bracket with rubber pad to prevent scratch
- Vast room to house power supplies up to 210mm in length
- Support side-interface power supplies
Everything Organised
Cable Management
A. Interior velcro strap x 3
B. Cable routing rubber grommet x 6
I/O Panel
- Mainstream Type-C (10Gbps) port for high-speed transmission
- Dust plugs for dust prevention
- Mic/Audio 2-in-1 port
Storage Compatibility
Modular Drive Trays
- Supports up to 3 drives: 1 x 3.5" HDD & 2 x 2.5" SSD
Case Compatibility
Extensive Interior
- Motherboard support: E-ATX ( ≤ 280mm), ATX, Micro-ATX, ITX
- CPU cooler max height: ≤ 175mm
- GPU max length: ≤ 440mm
- Power Supply max length: ≤ 210mm
Backed by a 2 year Antec warranty.
