Antec C7-ARGB E-ATX Full Tower Case White

The Antec C7-ARGB E-ATX Full Tower Case White is a premium full-view case with 270° tempered glass design to showcase your rig. It features tool-free access, vertical cooling, 3x pre-installed ARGB PWM fans (2x reverse at bottom, 1x rear), I/O panel, top and bottom dust filters, cable management, cooling compatibility, and supports E-ATX, ATX, Micro-ATX and ITX motherboards.

Features

---

C8 White ARGB Constellation Series

Full-View PC Case

Seamless Edge on Front & Side Panel

The front and left panel employ a unique 45° beveling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.

Airflow - Vertical Cooling

Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.

Three-Way Fan Bracket Bottom Fan Configuration

Comes with interchangeable fan brackets to cater to fans of different sizes.

• 3x 120mm Fan Installation
• 3x 140mm Fan Installation
• 2x 160mm Fan Installation

Airflow - Dual Chamber

Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.

Airflow Partition

Block hot air from entering the PSU/Drive chamber.

Pre-Installed Fans

2 x 160mm ARGB PWM Reverse fans + 1 x 140mm ARGB PWM Fan

Tranquil 140 x 25 ARGB PWM Fan

• Fan Speed (max.) 1500RPM
• Airflow 89.72 CFM
• Noise Level 27.5 dB(A)

Tranquil Reverse 160 x 35 ARGB PWM Fan

• Fan Speed (max.) 1500RPM
• Airflow 127.18 CFM
• Noise Level 38.85 dB(A)

160 x 35mm Reverse Fan

Distinctive ringed air baffle enclosing the fan blades enhances the airflow and stabilises the fan structure, accompanied by 8 damping feet to prevent resonance.

Exquisite Craftsmanship

Minimal clearance between fan frame and blades, achieving maximum operational efficiency.

Extremely Cool - Best Cooling Design

Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.

Extremely Cool - Cavernous Space for Extreme Liquid Cooling

Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.

Cooling Compatibility

Best Cooling Design

• Up to 10 fans simultaneously.
• Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear

Dustproof Design

Air Intake and Dust Filter

A. TOP | Full mesh panel

B. RIGHT SIDE | Full mesh panel

C. Bottom | Full-sized pull-out dust filter

Impressive Structure

0.8mm + 1.0mm Thick Steel & Tool-Free Design

The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.

Built for Builders

Graphics Cards Installation

• Provides ample width to perfectly support wider RTX40 series GPU.
• Supports vertical GPU riser brackets after removal.
• Features 8 reusable PCIe slot covers.

Powerful Compatibility

Power Supply Installation

• Stylish PSU bracket with rubber pad to prevent scratch
• Vast room to house power supplies up to 210mm in length
• Support side-interface power supplies

Everything Organised

Cable Management

A. Interior Velcro strap x 4

B. Rear Velcro strap x 2

C. Cable routing rubber grommet x 6

I/O Panel

• Mainstream Type-C (10Gbps) port for high-speed transmission
• Dust plugs for dust prevention
• Mic/Audio 2-in-1 port

Storage Compatibility

Modular Drive Trays

Supports up to 6 drives: 2 x 3.5" HDD & 4 x 2.5" SSD

Case Compatibility

Extensive Interior

• Motherboard support - E-ATX ( ≤ 280mm), ATX, Micro-ATX, ITX
• CPU cooler max height - ≤ 175mm
• GPU max length - ≤ 440mm
• Power Supply max length - ≤ 210mm