The Antec C8 ARGB Dual Chamber Case is a seamless edge on front and side tempered glass panels to showcase your rig. It features vertical cooling, dual chamber for independent cooling, bottom fan configuration, extreme liquid cooling support, pre-installed fans (2 x 160mm ARGB PWM reverse fans (bottom) and 1 x 140mm ARGB PWM fan (rear)), up to 10 simultaneously fan support (320mm top, bottom and 140mm rear), radiator support (360mm top, side, bottom and 120mm rear), mesh panel dust filters (top, right, bottom), tool-free design, graphics cards installation support, cable management, I/O panel, storage compatibility, and supports E-ATX (280mm), ATX, M-ATX and ITX motherboards.
Features
Full-View PC Case
Seamless Edge on Front & Side Panel
The front and left panel employ a unique 45° bevelling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.
Airflow
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.
- Full cut-out design for enhanced air intake
Three-Way Fan Bracket
Bottom Fan Configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
Airflow - Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
- Airflow Partition - Block hot air from entering the PSU/Drive chamber.
Pre-Installed Fans
2 x 160mm ARGB PWM Reverse Fans + 1 x 140mm ARGB PWM Fan
- Built-in ARGB & PWM fan control hub in sync with M/B
160*35mm Reverse Fan
Distinctive ringed air baffle enclosing the fan blades enhances the airflow and stabilises the fan structure, accompanied by 8 damping feet to prevent resonance.
Exquisite Craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
Extremely Cool
Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
Cavernous Space for Extreme Liquid Cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
Cooling Compatibility
Best Cooling Design
- Up to 10 fans simultaneously.
- Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear
Dustproof Design
Air Intake and Dust Filter
A. Top | Full mesh panel
B. Right Side | Full mesh panel
C. Bottom | Full-sized pull-out dust filter
Impressive Structure
0.8mm + 1.0mm Thick Steel & Tool-Free Design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.
Built for Builders
Graphics Cards Installation
- Provides ample width to perfectly support wider RTX40 series GPU.
- Supports vertical GPU riser brackets after removal.
- Features 8 reusable PCIe slot covers.
- Vertical Graphics Card Installation
- 8 x Fully Open PCle Slots
Powerful Compatibility
Power Supply Installation
- Stylish PSU bracket with rubber pad to prevent scratch
- Vast room to house power supplies up to 210mm in length
- Support side-interface power supplies
Everything Organised
Cable Management
A. Interior velcro strap x 4
B. Rear velcro strap x 2
C. Cable routing rubber grommet x 6
I/O Panel
- Mainstream Type-C (10Gbps) port for high-speed transmission
- Dust plugs for dust prevention
- Mic/Audio 2-in-1 port
Storage Compatibility
Modular Drive Trays
- Supports up to 6 drives: 2 x 3.5" HDD & 4 x 2.5" SSD
Case Compatibility
Extensive Interior
- Motherboard support: E-ATX ( ≤ 280mm), ATX, Micro-ATX, ITX
- CPU cooler max height: ≤ 175mm
- GPU max length: ≤ 440mm
- Power Supply max length: ≤ 210mm
Backed by a 2 year Antec warranty.
