The Antec Performance 1 FT Silent Full Tower Case features a Mesh glass side panel, steel front airflow panel, supports E-ATX, ATX, Micro-ATX, ITX motherboards, 4 x pre-installed 140mm fans, radiator support at the front (up to 420mm), top (up to 360mm), and rear (up to 120mm), and supports a graphics card of up to 400mm in length.
Features
Performance 1 FT Silent
Full-Tower E-ATX Highly Compatible PC Case.
Exquisite Steel Mesh
Best Dust Prevention Design
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
Sound-Dampening Side Panels
Silent PC Case
Both side panels are designed with sound-dampening foam, providing even better overall sound insulation.
Cable Management on Point
Everything Organized
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
- Three sets of velcro straps for fan & I/O cable routing.
- Five velcro straps for hardware and power supply cables.
- Two velcro straps at the rear for rear I/O cable routing.
Easy Installation
Removable Top Cooling Bracket.
Pre-Installed 4 Tranquil Silent PWM Fans
More Tranquil, More Airflow
Unique fan blade and frame design offers powerful airflow with low noise accomplished.
Tranquil 140mm
- Fan Speed (max.) 1500 RPM
- Airflow 85.96 CFM
- Noise Level 27.5 dB(А)
Tranquil 120mm
- Fan Speed (max.) 2000 RPM
- Airflow 59.23 CFM
- Noise Level 28.6 dB(А)
Exquisite Craftsmanship
Minimal clearance between fan frame and blades, achieving maximum operational efficiency.
Vibration-Absorbing & Anti-Noise Pads
Equipped with eight damping feet to prevent chassis and fan resonance, reducing noise.
Best Airflow Path for GPU Cooling
Powerful Airflow Path Design
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling.
- Top: Magnetic dust filter.
- Front: Magnetic & clip-on dust filter.
- Bottom: Full-sized pull-out dust filter.
Supports RTX 40 Series Graphics Cards
Highly Compatible Full-Tower PC Case
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Detailed Features - Thoughtful Design
Stud for Fixing
The stud for fixing design provides a more convenient PC-DIY experience.
Drop-Proof Bolt
The drop-proof hook design avoids side panel damage.
8 x Fully Open PCI-E Slots
Bridgeless design supports vertical GPU installation.
Back-Mounted PSU Bracket
For easy installation.
Rubber Grommets
4 included rubber grommets for cable
Rear Velcro Straps
For the rear 1/0 cable routing.
Best Cooling Design
Cooling Compatibility
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
- Supports 360mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously.
Modular Drive Trays
Storage Compatibility
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
Extensive Interior
Case Compatibility
- Motherboard support E-ATX(≤ 285 mm), ATX, Micro-ATX, ITX
- CPU cooler max height ≤ 175 mm
- GPU max length ≤ 400 mm
- Power Supply max length ≤ 245 mm (with HDD); ≤ 440 mm (without HDD)
Backed by a 2 year Antec warranty.
