The Antec Performance 1 FT Full Tower Case features a tempered glass side panel, steel front airflow panel, supports E-ATX, ATX, Micro-ATX, ITX motherboards, 4 x pre-installed 140mm fans, radiator support at the front (up to 420mm), top (up to 360mm), and rear (up to 120mm), and supports a graphics card of up to 400mm in length.
Features
Performance 1 FT
Full-Tower E-ATX Highly Compatible PC Case.
Temperature Display
System Status with a Glance
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
4mm Tempered Glass Side Panel
PC Showcase
Both side panels adopt tempered glass for better PC showcase visual effects.
Cable Management on Point
Everything Organized
2 cable covers are included for beautifying the cable management area.
There are ten sets of velcro straps for easy cable management.
- Three sets of velcro straps for fan & I/O cable routing.
- Five velcro straps for hardware and power supply cables.
- Two velcro straps at the rear for rear I/O cable routing.
Easy Installation
Removable Top Cooling Bracket.
Storm T3 PWM Fan
Pre-Installed 4 Fans of 30mm Thickness
- 3 x Storm T3 140mm PWM Fans at the Front.
- 1 x Storm T3 120mm PWM Fan at the Rear.
Cooling Compatibility
The Storm T3 Fan of 30mm thickness comes with thicker and longer fan blades, efficiently increasing the air intake.
The PWM function easily reaches the balance between cooling and silence.
Exquisite Steel Mesh
Best Dust Prevention Design
The mesh front panel adopts the 1.2mm vent holes and the magnetic & clip-on design with easy access.
Best Airflow Path for GPU Cooling
Powerful Airflow Path Design
Airflow-enhancing mesh front panel provides massive air.
Ample mesh at the bottom with fans (optional) on the meshed PSU shroud provides the best performance for the GPU cooling.
- Top: Magnetic dust filter.
- Front: Magnetic & clip-on dust filter.
- Bottom: Full-sized pull-out dust filter.
Supports RTX 40 Series Graphics Cards
Highly Compatible Full-Tower PC Case
Full-tower PC case in 230mm width supports the up-to-date 40 Series GPUs and high-end PC components.
Detailed Features - Thoughtful Design
Stud for Fixing
The stud for fixing design provides a more convenient PC-DIY experience.
Drop-Proof Bolt
The drop-proof hook design avoids side panel damage.
8 x Fully Open PCI-E Slots
Bridgeless design supports vertical GPU installation.
Back-Mounted PSU Bracket
For easy installation.
Rubber Grommets
4 included rubber grommets for cable
Rear Velcro Straps
For the rear 1/0 cable routing.
Best Cooling Design
Cooling Compatibility
- Support a 420mm radiator at the front. (When installing a 420mm radiator at the front, the radiator at the top must be less than 360mm.)
- Supports 360mm radiators at the front and top simultaneously.
- Up to 10 fans simultaneously.
Modular Drive Trays
Storage Compatibility
Supports up to 5 drives: 2 removable drive trays for 3.5" HDD/2.5" SSD & 3 drive trays for 2.5" SSD.
Extensive Interior
Case Compatibility
- Motherboard support E-ATX(≤ 285 mm), ATX, Micro-ATX, ITX
- CPU cooler max height ≤ 175 mm
- GPU max length ≤ 400 mm
- Power Supply max length ≤ 245 mm (with HDD); ≤ 440 mm (without HDD)
Backed by a 2 year Antec warranty.
