The G.Skill Flare X5 32GB (2x16GB) features 5600MHz CL30 DDR5 EXPO memory, tested latency of 30-36-36-89, 1.25V, minimalistic anodized low-profile design, AMD EXPO support and is designed for DDR5-enabled AMD AM5 platforms.
Features
Designed for AMD, engineered for performance
Created from high-quality hand-screened DDR5 DRAM ICs, Flare X5 memory kits are designed for performance on AMD platforms. Featuring AMD EXPO (EXtended Profiles for Overclocking) profiles, Flare X5 allows simple one-step memory overclocking through BIOS on supported motherboards.
Matte minimalism
Available in anodized matte black, the Flare X5 memory module features a minimalistic design inspired by classic racing stripes and grills, and is ideal for a variety of build themes with its simple design.
Created for quality
Each Flare X5 memory kit is created with hand-screened ICs and tested under G.SKILL’s rigorous validation process to ensure outstanding quality.
Compact low-profile design
Featuring a low-profile height of just 33mm, the Flare X5 is an ideal choice for compact PC builds or systems with large CPU coolers (Please check the specifications of your CPU cooler for actual height clearance).
AMD EXPO support
Just set and go. Programmed with AMD EXPO overclocking profiles, the only thing that stands between you and awesome performance is a simple BIOS setting (Enable the EXPO profile in the BIOS to reach up to the rated overclock speed of this memory kit. Maximum memory speed and system stability depends on the capability of the motherboard & CPU).
Specifications
| Memory Type |
DDR5 |
| Capacity |
32GB (16GBx2) |
| Multi-Channel Kit |
Dual Channel Kit |
| Tested Speed (XMP/EXPO) |
5600 MT/s |
| Tested Latency (XMP/EXPO) |
30-36-36-89 |
| Tested Voltage (XMP/EXPO) |
1.25V |
| Registered/Unbuffered |
Unbuffered |
| Error Checking |
Non-ECC |
| SPD Speed (Default) |
4800 MT/s |
| SPD Voltage (Default) |
1.10V |
| Fan Included |
No |
| Warranty |
Limited Lifetime |
| Features |
AMD EXPO Profile Ready |
| Additional Notes |
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP/EXPO, enable XMP/EXPO/DOCP/A-XMP profile in BIOS to reach the rated potential XMP/EXPO overclock speed of the memory kit, subject to the use of compatible hardware. Please refer to the "How to Enable XMP" guide.
Reaching the rated XMP/EXPO overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components. |
Backed by a limited lifetime G.Skill warranty.
