The Lian Li O11D EVO Upright GPU Bracket allows you to show off your graphics card in a unique way with the upright bracket. It can be mounted on the HDD tray panel or fan bracket and supports up to 3 slot thick graphics cards.
Note: PCIe riser cable is not included (sold separately).
Features
Overview
- Upright graphics card accessories for O11D EVO
- New mounting angle for GPU opens room for unrestricted chimney-style configuration
O11D EVO Upright GPU Kit
Show off your graphics card in a unique way with the exclusive upright GPU bracket, including a PCIe 4.0 riser cable for seamless connectivity.
Two Mounting Ways Work on Both Modes
Both HDD tray panel and fan bracket support to mount upright GPU kit on normal or reverse mode.
The GPU holds perfectly beside the motherboard and holds 2 HDDs or 4 SSDs behind the GPU.
HDD Tray Panel Scenario
Supreme Water-Cooling Configuration - Normal Mode with HDD Tray Panel Scenario
Moving the GPU next to the motherboard opens up the main chamber in the chassis for the tubes to pass through and creates a chimney-style airflow, effectively cooling the top and bottom radiator.
Ultimate Air-Cooling Configuration - Normal Mode with HDD Tray Panel Scenario
Paired with the upright GPU kit, the front mesh kit provides the O11D EVO with additional fresh air intake from the front to better cool the GPU and the CPU.
Due to GPU cooler design, some GPUs have been found to perform significantly better with GPU IO facing down when using upright GPU kit.
Fan Bracket Scenario
Extreme AIO-Cooling Configuration
Reverse Mode at Fan Bracket Scenario
Exhaust fans behind the GPU directly pull the heat out of the chamber, effectively control the GPU temperature.
Reverse Mode with Front Mesh Kit at Fan Bracket Scenario
Replace the glass panel to the front mesh kit brings further fresh air into the chassis to cool the CPU and GPU efficiently.
Support Wide Variety Sizes GPU
While the bracket supports up to 3 slots thick GPUs, thin GPUs can be mounted at the second slot.
In addition, the L-type support bracket can be adjusted according to the GPU’s width and thickness.
Gen 4.0 PCI-E Riser Cable
The PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performances.
Fan and Radiator Compatibility
When installing a three-slot thick GPU in the upright position, the radiator width clearance beside the bracket is limited to 130mm, and 120mm for fans.
Backed by a 1 year Lian Li warranty.
