Lian Li Lancool 215 Mesh A-RGB Case White

On sale! (normally $149) The Lian Li Lancool 215 Mesh A-RGB Case White features a tempered glass side panel, mesh front panel for efficient ventilation, dust filters, supports ITX, m-ATX, ATX, and e-ATX motherboards, 2 x pre-installed 200mm A-RGB front fans, 1 x pre-installed 120mm rear fan, radiator support at the front (up to 360mm), and top (up to 280mm), and supports a graphics card of up to 370mm in length.

Features

---

Optimised thermal management

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system.

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame, you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario. Don’t worry about the fan screws, they won’t interfere with the radiator.

Please note: Computer parts not included - only for illustrative purposes.

Stunning PC illumination

Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.

• Highlighted logo - The LIAN LI logo glows in sync with the fans.
• Experience A-RGB via one button - The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.

A-RGB synchronisation with motherboards

Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.

Effortless cable management

• Pre-installed fan hub - The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
• Plenty of space for cable management - The 22MM thick space behind the motherboard ensures the cables fit in well.
• Keep the cable nice and neat - The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.

Storage & motherboard support

• E-ATX Motherboard Compatible - Fits motherboards with a maximum width of 280MM.
• Removable/adjustable cage supports - 2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD
• 2 x SSD support behind the motherboard

Simple dust management

The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis. Moreover, the magnetic dust filter on the top and the removable full-length dust tray at the bottom protect the internal components from dust accumulation without impeding the airflow.