EK Loop Acrylic Hard Tube 10/12mm 0.8m Pre-Bent (6 Pieces)

The EK Loop Acrylic Hard Tube 10/12mm Pre-Bent 90 Degrees is a 6-pack of 10/12 (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.

Features

---

The EK Loop Acrylic Hard Tube comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.

Dimensions

The package contains 6 pieces of tubing only. Please purchase HDC or HDP fittings separately.

EK recommend wetting the gasket (O-ring) using drops of water before installing the solid tube for easier installation.