Kolink Inspire K9 ARGB Tempered Glass Case

The Kolink Inspire K9 ARGB Tempered Glass Case features a tempered glass side panel, matte black front panel with a multi-angled ARGB light strip, supports m-ITX, m-ATX, ATX motherboard, 1 x pre-installed 120mm ARGB rear fan, radiator support at the front (up to 240mm), and rear (up to 120mm), and supports a graphics card of up to 300mm in length.

Features

---

Overview

From the popular Inspire series comes a new entry into the series - The K9 ARGB Midi-Tower. With an aesthetically pleasing front panel design featuring an ARGB strip that also extends across the PSU shroud, the Inspire K9 Midi-Tower is great for those who prefer both a subtle front panel design alongside ARGB functionality.

The features of the Kolink Inspire K9 ARGB at a glance:

• Matte Black front panel with a multi-angled ARGB strip
• ARGB strip accenting the PSU shroud
• Pre-installed rear 120mm fan with digitally addressable RGB lighting
• Option to sync to motherboard software provided as standard
• Tempered glass side panel for unobstructed view of the interior
• Designed for ATX/Micro-ATX-/Mini-ITX motherboards
• Support for radiators up to 240mm in the front & 120mm at the rear
• I/O Panel with 1x USB3.0 & 2x USB2.0, HD Audio & RGB button
• Graphics cards up to 300mm supported, CPU coolers up to 155mm, PSUs up to 180 mm

ARGB with a difference

The Kolink Inspire K9 features an angled front ARGB strip, which also extends across the PSU shroud, along with a rear 120mm ARGB fan, controlled by the I/O panel RGB button or via connection to your motherboards 3-Pin 5VDG connector using the applicable software. The front panel features a predominantly matte black finish, with ventilation on both sides. Users are also free to install up to a 240mm radiator in the front and a 120mm at the rear.

Aside from the pre-installed fans, users are also free to install three 120mm fans on the front panel, plus two 120mm fans in the roof. A full tempered glass side panel shows off your system build in style.

Room for hardware

The interior comes entirely in black, with a PSU shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" HDDs, using a 'drop and lock' system to secure. Alternatively, 2.5" SSDs can be installed here, directly on top of the PSU shroud or next to the motherboard. Underneath the case is a removable dust filter suitable for an ATX PSU up to 180mm.

Graphics cards can be up to 30cm long and CPU coolers up to 15.5cm tall. Additionally, the I/O panel located at the front possesses two USB2.0 ports as well as a USB3.0 Type-A port.