Lamptron RW460 Fan and LED Controller with LC Display

Features

The Lamptron RW460 PCI RGB & Fan Controller offers almost unlimited control over fans and RGB lighting. With up to 36 watts of power per channel there is almost no limit. The fan controller supports both fans with and without PWM. The power supply is via a 4-pin Molex connection. In total, up to four fans can be connected to the controller board.

In addition, four 4-pin RGB LED fans or strips (12VGRB) and four digitally addressing 3-pin RGB devices (5VDG) can be connected. The additional power supply is provided via a SATA connection. There are also four temperature sensors which can also be connected to the board.

The illumination and speed of the fans shall be controlled by the infrared remote control provided. For example, the fans can be switched to either the quiet mode at 40 percent or to the maximum mode. Or leave the fan control to the controller. In addition, the lighting modes are determined by remote control. The Lamptron RW460 can be connected to a mainboard or other RGB controller via the attached cable, allowing the synchronization of RGB and ARGB lighting with external control devices.

In order to know how fast the fans rotate and what voltage they are running at and what temperatures are inside the housing, Lamptron has added a chic LC display. It is attached to three free PCI slots and the output can be admired by a transparent side window. The board of the controller is connected to it with a cable and can be hidden somewhere in the housing.