Alpenfohn Brocken 3 CPU Cooler

Features

HighEnd Heatpipes with gapless H.D.C-technology

Thanks to the gapless H.D.C –technology the five high performance heatpipes have direct contact to the CPU for increased performance.

Asymmetrical heatsink for enhanced flexibility

Due to the asymmetrical heatsink all memory slots can be populated – even if high heatspreaders are used on the modules.

140mm Wing Boost 3 Fan

Rotor
By means of a new blade angle the rotor has been optimised to lower speed in order to achieve in comparison with other fans a significantly higher volume flow, total pressure and exit speed at the same speed. And what is more, the aerodynamically optimised blade geometry favours the axial flow direction. Compared to conventional fans this “dispersion” of the airflow offers an increased surface to efficiently dissipate the heat of the heatsink. Additionally, the new blade geometry prevents the backflow of the proper flow direction – especially with higher counter pressure!

Guide Wheel
The rigidly integrated guide wheel in the fan frame allows to significantly increase the static pressure as well as to reduce the twist of the exit flow. The result is a further optimisation of the radial flow component and the resulting noise reduction because the flow is not broken abruptly when the airflow hits the aluminium fin.

Plus Function
WingBoost3 includes a "Plus Function". It means that a Y-switch has been fastened at the PWM-plug for a second PWM fan. The switch allows controlling another PWM fan via a PWM board signal so it does not have to be connected via a cable adaptor or a 3-pin connection. Please note: When using a WingBoost3 fan up to three other fans can be connected to just on PWM board signal.

RockMount2 Mounting System

RockMount2 has become even more user-friendly when you install the cooler. RockMount2 supports all common bases from Intel and AMD. 2011, 2011-v3, 2066, 1366, 115x (Coffee Lake compatible), 775, AM4, AM3(+), AM3, AM2(+), AM2 as well as FM1. RockMount2 , as it usually does with contact pressure, counts on the base specific requirements of the respective manufacturer, while considering weight and size of the cooler.